Our plastic rinsing tank is a highly efficient equipment designed for plastic recycling and washing, which is mainly used to remove impurities and dirt from the surface of plastics. The equipment is made of stainless steel, which is robust and has excellent corrosion resistance. It is suitable for cleaning all kinds of waste plastics, including all kinds of PP PE PVC rigid flakes or film fragments.
Introduction of Plastic Washing Machine
The plastic chips washing machine is a key piece of equipment located behind the triturador de plástico, which is used to process the crushed plastic.
The crushed plastic falls directly into the washing tank, and the multiple stirring rollers in the tank can effectively stir the material, clean off the impurities and dirt on the surface of the plastic, and at the same time force the material to move forward.
At the end of the washing tank, a vertical dewatering machine is usually connected, which is used to lift the material out and carry out preliminary drying. The plastic washing machine not only efficiently removes contaminants from the surface of the plastic, but also seamlessly connects to the dewatering machine to improve the efficiency of the entire washing and dewatering process. This combination ensures that the washed plastic is clean and free of contaminants, providing high-quality raw material for subsequent recycling and processing.
Advantages of Waste Plastic Washing Machine
High-quality material: The cleaning tank is made of corrosion-resistant, stainless steel, which ensures that it will not rust for a long time and is easy to clean and maintain.
High-efficiency agitation system: A washing tank is usually equipped with three rows of agitator wheels, which effectively remove impurities and dirt from the plastic surface through powerful agitation. According to the customer’s production demand and the degree of dirty raw materials, we can extend the length of the washing tank or configure two cleaning tanks to improve the cleaning effect.
Personalização flexível: To meet the needs of different customers, the length of the waste plastic washing machine and the number of agitator wheels can be adjusted according to the specific situation, to optimize the cleaning effect.
A perfect match for vertical dryers: The plastic waste washing machines are often connected to vertical dryers at the end, which can lift out the washed plastics and carry out the initial drying. With this combination, the washing and dewatering process is seamlessly integrated, increasing the efficiency of the entire recycling and disposal process.
Structure of Plastic Washing Tank
Usually, plastic rinsing tanks are made of high-strength, corrosion-resistant plastic materials to ensure long-term stable operation. Its main structure includes the tank body, water inlet, drain, and agitation device.
The tank body adopts a deep and wide design to accommodate a large number of plastic products, while the water inlet and drain are located at suitable positions to ensure even distribution of water flow and efficient discharge. The mixing device usually adopts a toothed plate or water flow agitation, which is used to mix the cleaning liquid sufficiently during the cleaning process to improve the cleaning effect. Through reasonable structural design, the plastic rinsing tank can effectively remove surface pollutants and create good conditions for the subsequent plastic recycling process.
Working Principle of Plastic Recycling Washing Machine
The material is put into the front of the plastic recycling washing machine, the rinsing toggle wheel rotates and drives the material to rinse and move forward, and the spoils and impurities on the material are precipitated downward during the rinsing process.
After several rinsing paddle wheel rinsing, the material reaches the end of the sink, and then the discharge fork paddles out of the sink. The bottom of the sink has three sewage ports, when the spoil and impurities accumulate more, the spoil and impurities can be discharged by the sewage port.
Parameters of Plastic Chips Washing Machine
Model SL-150 is a standard model plastic rinsing tank designed for lengths between 15 and 20 meters, equipped with 6-10 rotating wheels with a distance between each two wheels of between 1.5 and 2 meters. It is suitable for plastic pelletizing plants with outputs in the range of 100-500 kg/h. Our shortest washing tank is 5 meters with two agitator wheels for smaller outputs.
However, once your output gradually increases to the 600-1000kg/h level, to ensure that you can efficiently handle larger production runs, Shuliy recommends that you consider upgrading to a longer plastic rinsing tank, such as a thirty-metre long model. By choosing a larger capacity machine, you can ensure that you can maintain an efficient process at high production rates and meet your growing production needs. You can also feel free to contact us for specialized solutions.
Plastic Rinsing Tank Factory Display
If you are interested in the plastic rinsing tank or other plastic recycling equipment, please contact us to discuss pricing and ordering details at any time.
Plastic Washing Machine Price
We offer high-quality and durable plastic rinsing tanks at reasonable and competitive prices. Our plastic washing machines are well-designed with advanced manufacturing technology to ensure stability and efficiency. Whether you need to upgrade your equipment or set up a new plastic pelletizing plant, our plastic film washing machines will meet your needs. Please feel free to contact us, we will provide you with detailed information about the rinsing tank price and customize the most suitable solution for you.