EPS hot melting recycling machine, as an important waste foam processing equipment, may encounter some common failures during the process. These malfunctions can be caused by a variety of reasons, but recognizing and solving these problems can help improve the efficiency and stability of the equipment.
EPS hot melting recycling machine blade wear
After a long time of use, the blades of the EPS foam melting machine may be worn out. This kind of wear may be caused by the following reasons: firstly, the blade rotates at high speed for a long time, which is in direct contact with the EPS foam, and the abrasion leads to the wear of the blade surface; secondly, if the foam contains foreign matter, such as metal or gravel particles, it will lead to more rapid wear of the blade.
Solutions
- Regularly check the state of the EPS hot melting recycling machine blade, once found worn, replace the blade in time;
- Avoid putting the foam containing foreign materials into the EPS foam melting machine, and clean the debris around the blade regularly.
Overheating and stoppage of EPS hot melting machine
The EPS hot melting recycling machine may overheat during intensive operation. Overheating may be caused by the following reasons: firstly, the internal temperature of the machine is too high due to a long period of uninterrupted operation; secondly, the high ambient temperature may also lead to poor heat dissipation inside the EPS foam melting machine.
Solutions
- Regularly stop the EPS foam melting machine to cool down the temperature, avoid long time and high-intensity work;
- Ensure that the ventilation around the machine is good, and use an external fan or air conditioner to reduce the ambient temperature.
Abnormal vibration of lumping machine
Itu EPS hot melting machine produces obvious vibration when running, which may even lead to equipment damage. The abnormal vibration of the EPS hot melting recycling machine may be caused by the unstable foundation, improper installation of the equipment, or internal failure of the EPS foam melting machine.
Solutions
Perform regular maintenance on the EPS hot melting recycling machine to ensure that it is installed on a stable foundation. Adjust the installation position of the equipment to ensure horizontal stability. If necessary, check the internal structure and repair or replace damaged parts.
